Pangu iOS 9 jailbreak tool v1.1.0 released 

The Pangu Team has just released an update to v1.1.0 of the iOS 9 jailbreak tool.

The new tool is of a size of 73MB and it contains the following bug fixes and stability improvements, especially the success rate as emphasized by many of the core members of the team on Weibo just now.

  1. Improve the success rate and reliability of jailbreak program for 64bit devices
  2. Optimize backup process and improve jailbreak speed, and fix an issue that leads to fail to jailbreak due to low disk space in Windows.
  3. Fix a bug that leads to an exit of the jailbreak tool due to abnormal network status.
  4. Add the re-jailbreak function (only for some devices that were upgraded via iTunes but were detected as jailbroken)
  5. Fix a bug that leads to fail to use the instrument function in Xcode.

For those who had jailbroken, the Pangu team also reminded those users to update Pangu 9.0.x in Cydia if your device is already jailbroken, without the need to re-jailbreak it. Yet, the package Pangu 9.0.x Untether 1.1 is still pending at Saurik’s side for his approval to release officially on Cydia. So please be patient as it will drop very soon. We will certainly update this post when we see the update is available.

Update: Pangu 9.0.x Untether 1.1 is available on Cydia now:

Cydia Pangu Untether Jailbreak iOS 9 1.1

For those who haven’t yet, you can go to http://en.pangu.io and download the latest tool to jailbreak your iOS devices.


Side note from one core team member, a.k.a windknown on his personal Weibo that he had rebooted his iPhone for over 1000 times to locate a certain bug and fix it. We don’t know if it is something related to the Bootloop of Death (BLoD) that concerned by many, but still, shoutout to them for the effort so far!

But yet, there is no news on a release of Mac version. In the meantime, you can use Virtual Machine to jailbreak with your Mac.

Advertisements

51 Comments Add yours

  1. Gorka says:

    Hello, one question. Pangu has repo in Cydia? Thank you

    Like

    1. Stephen Chan says:

      No, Saurik will release on his default repo

      Like

  2. mcnanito says:

    i try to download the new version but still download the old version

    Like

  3. mcnanito says:

    i try to download the new version of pangu but still download the old version ??/

    Like

    1. Stephen Chan says:

      Try again. I can download the v1.1

      Like

      1. muntasir says:

        v1.1 not opening in my windows 7 ultimate (service Pack 1)…….Why….Plz help

        Like

    2. try to clean up your cache, I do that and now is working fine i’m downloading 1.1.0

      Like

  4. ikazo says:

    i had installed pangu the last version 1.1.0 and it doesn’t work or it works but didn’t detect my iphone

    Like

  5. lectricbass says:

    1. Downloaded jailbreak for iOS9(v1.0.1)
    2. Ran exe file (Win10)
    3. Exe file shows DOWNLOAD UPDATES button, click
    4. Exe file re-downloads 1) above.
    4. Repeat ad nauseum

    What am I doing wrong?

    Like

    1. TJ says:

      Same issue 😦

      Like

  6. si709 says:

    Pangu 9.0.x Untether 1.1 just arrived in Cydia

    Like

    1. Toya says:

      I updated this then after restarting, it went on safe mode.
      I restarted and it went out of safemode,
      i went to settings, opened software update and then while loading, it suddenly went blank,
      then it got stuck in apple LOGO boot with occasional blue screen,
      It is now on BLOD, I don’t know what happened, it worked just fine before, (facepalm)

      Like

  7. F (@fahd594) says:

    after using latest update of jailbreak tool 1.1.0 the process is very fast but cydia wont open and crashes on very first time, tried on 2 iphone 6 same results

    Like

    1. Stephen Chan says:

      Never encountered before…did you switch off airplane model before launching Cydia for the first time?

      Like

      1. F (@fahd594) says:

        yes and turned on the wifi too before opening the cydia for the first time, i am testing on a third one which is ipad mini i hope this time cydia will work

        Like

  8. sinchan009 says:

    still stuck on 90% then time out. 😦

    Like

    1. max says:

      yep me to done everything right be over and over it

      Like

  9. sinchan009 says:

    still stuck at 90%. jailbreak time out. oh no… 😦

    Like

    1. Stephen Chan says:

      Any firewall? Did you run as administrator? Try agsin

      Like

    2. pypk says:

      I have the same problem. I was trying to jailbreak a Ipad Mini 2 Cellular. You?

      Like

      1. ChrisG says:

        That’s the device I was having problems with on the last jailbreak version – havn’t tried this one yet…

        Like

  10. still didnt work my iphone stuck again on apple logo after backup restore. boot loop didnt solved.

    Like

    1. Stephen Chan says:

      Did you encrypt your backup?

      Like

    2. Filippo says:

      Same thing for me. I don’t now if i have to try to unistall cydia tweak until i find the tweak that caused stuck on boot logo or i have to wait a pangu fix..

      Like

  11. John says:

    Has the BLOD been fixed with the Pangu v1.1.0?

    Like

  12. Franck says:

    Hi,

    Yesterday I used de version 9.1.0.1. After using it, and following the process as told by the program, I could see cydia, but it didn’t work (crashes after opened in less than a second)
    Airplane mode was off, I was in a Wi-Fi network with no Firewall.

    Today I tried again. First I had made the Restoration of my iPhone by the iTunes with a 9.0.2 firmware.
    Tha I downloaded the new PanGu 9.1.1.0.
    I had made the whole process but as it ends, it shows again that the device is JailBreak Ready, but Cydia is not there, and I click start again, and it run again, and again I did all that it told me to do, and again when it finish, it is in the same screen, with de device identified but JB ready, no Jailbronken.

    Any clue?

    iPhone 5 here.

    Like

  13. MArio says:

    I run as administrator in Wondows 10, and doesnt open, tell me ask the creator fo the program for a version for the operating system, any help?

    Like

  14. Thamer says:

    Hi,
    When I updated Pangu 9.0.x Untether 1.1 from Cydia and report my iPhone 5s it didn’t work because of (BLoD). Unfortunately, it happened before the update and I restored my iPhone.

    Like

  15. Bunny says:

    Hi there
    Is Pangu 9 1.1.0 working with newest OS 9.1 upgrade?

    Like

  16. Fanb00y says:

    My iphone stuck on apple when i upgrade paangu on cydia, any solution?

    Like

  17. Fanb00y says:

    My iphone stuck in apple when upgrade pangu on cydia, any solution?

    Like

  18. flipp06 says:

    some reason the program doesnt detect my iphone….

    Like

  19. flipp06 says:

    some reason the jailbreak program wont detect my iphone.

    my itunes doesn’t want to detect my iphone either.

    WHY YOU NO DETECT MY IPHONE COMPUTER!!

    Like

  20. soetgoete says:

    Doesn’t work for me.. got to 90% then the iphone screen gets a strange pixel picture then restarts 😦

    Like

  21. Kurt says:

    downloaded v1.1.0 and it completed the whole thing but cydia is not their

    Like

  22. Mike Conner says:

    Yes. You must open itunes and uncheck the box for “Encrypt backup”. Then running the jailbreak should work fine.

    Like

  23. TJ says:

    The update broke it. I needed to re-jb as Cydia mysteriously disappeared. Pangu, Win 10, iPhone 6+, in airplane, no encryption, no passcode, no findmyiphone.

    Run Pangu, it asks you to update, I do, I run as admin. It asks to update, I do, I run as admin, rinse, repeat over and over, no joy.

    It’s broke. 😦

    Like

  24. LucasPlayz says:

    WORKS 😀 YESSSS

    Like

  25. ahmed says:

    it doesn’t work for my on iphone 5 i see only pangu and WWDC and no cydia no jailbreak

    Like

  26. trev373 says:

    does this work on ios 9.1?

    Like

  27. its not working for me, im on the pangu latest version but its telling me to download latest version help

    Like

  28. josh says:

    Worked first time here..easy…painless…no errors…Thank you Pangu team…AWESOME … iPhone 6S on 9.0.2

    Liked by 1 person

  29. ofdrive says:

    Doesn’t work on my bootcamp partition… Stock on the backup process for hours… Are you planning to release Pangu 1.1.0 for MAC?

    Like

    1. Stephen Chan says:

      No word on Mac version yet

      Like

  30. Joseph says:

    Hey. I just installed 1.1 version, the jailbreak it’s done but cydia don’t open.
    How procide?

    Like

  31. geraunim says:

    since Pangu 1.1.0, the tweak called StatusModifier gets iPad Air stuck on apple logo at startup… I tried a lot of times installing/uninstalling the tweak, same result.

    Like

  32. TJ says:

    Any help for the infinite upgrade loop in Pangu? Cannot use at all, just wants to update.

    Like

  33. salem says:

    i have windows 8 but pangu doesn’t work with it , any solution ?

    Like

  34. Ashwath says:

    Use taig beta if it doesn’t work over and over again

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s